FC-0208 (MPIF Standard 35 designation) is a copper-steel powder metallurgy alloy renowned for its exceptional balance of tensile strength, fatigue resistance, and cost-effectiveness in high-volume industrial manufacturing. Engineered by alloying iron with elemental copper (1.5%–3.9%) and combined carbon (0.6%–0.9%), FC-0208 achieves superior mechanical performance through liquid-phase sintering dynamics.
Technical Information Gain: Unlike standard wrought carbon steels, FC-0208 utilizes solid-state carbon diffusion combined with liquid copper wetting during sintering (1120°C–1150°C). This creates a homogeneous pearlite matrix reinforced with solid-solution copper, yielding high dimensional predictability and minimal shrinkage distortion during mass production.
| Element | Composition Range (Wt %) | Metallurgical Function | Tolerance Impact |
|---|---|---|---|
| Copper (Cu) | 1.5% – 3.9% | Liquid phase sinter promoter; increases matrix hardness and tensile yield via solid solution. | ±0.15% |
| Combined Carbon (C) | 0.6% – 0.9% | Forms pearlite structure; enhances yield strength, wear resistance, and hardenability. | ±0.05% |
| Total Iron (Fe) | Balance (Min 95%) | Primary structural matrix. High purity sponge or atomized iron powder substrate. | Base Metal |
| Other Elements / Impurities | < 2.0% Max | Includes manganese, nickel, or residual lubrication ash post-burnout. | Strict Boundary |
| Density Grade (g/cm³) | Ultimate Tensile Strength (MPa) | Yield Strength (MPa) | Apparent Hardness (HRB / HRC) | Fatigue Limit (MPa) |
|---|---|---|---|---|
| 6.4 – 6.6 (Standard) | 340 – 410 MPa | 280 – 320 MPa | 60 – 75 HRB | 130 MPa |
| 6.6 – 6.8 (Medium High) | 420 – 520 MPa | 350 – 410 MPa | 75 – 85 HRB | 170 MPa |
| 6.8 – 7.1 (High Density) | 540 – 680 MPa | 450 – 550 MPa | 85 – 95 HRB (up to 35 HRC HT) | 220 MPa |
| > 7.1 (Double Press/Sinter) | 700 – 850 MPa | 600 – 720 MPa | 38 – 45 HRC (Heat Treated) | 280 MPa |
Procurement directors and chief engineers in Tier-1 automotive, industrial power tool, and hydraulic pump industries face continuous pressure to lower Total Cost of Ownership (TCO) while guaranteeing absolute batch-to-batch consistency. Sintered FC-0208 metal components present a superior alternative to fully machined forging stock or investment castings.
By eliminating 80% to 95% of secondary machining operations, FC-0208 powder metallurgy drastically reduces raw material wastage. Chip-less manufacturing preserves raw steel usage efficiency above 95%, safeguarding buyers from volatile raw material pricing.
Utilizing high-speed multi-cavity rigid tooling on automated mechanical and hydraulic presses, production capacities reach 10,000 to 50,000 components per day per press line, assuring global OEMs seamless supply continuity.
FC-0208's controlled interconnected porosity (ranging from 10% to 22% volume) allows vacuum impregnation with self-lubricating synthetic oils (SAE 20 to SAE 30), establishing lifetime lubrication for bushings, gears, and wear plates.
FC-0208 sintered iron-copper steel is deployed across mission-critical systems worldwide. Below are the primary industrial sectors leveraging custom FC-0208 OEM parts manufactured by Ningbo Jiehuang Chiyang Electronic Tech Co., Ltd. (JHMIM):
Engine timing sprockets, oil pump driven gears, variable valve timing (VVT) rotor components, and transmission shift forks require high dynamic fatigue strength. Heat-treated FC-0208 components provide extreme tooth bending resistance under cyclic shock loading.
Planetary gear carriers, ring gears, impact driver anvils, and bevel gears for professional grade cordless drills. FC-0208 provides wear-resistant tooth profiles that sustain high input torques without premature micro-pitting.
Gerotor pump elements, valve plate guides, and side wear plates. The uniform copper diffusion in sintered FC-0208 prevents galling and scuffing during high-rpm fluid shearing under elevated thermal conditions.
JHMIM integrates advanced powder metallurgy powder blending, state-of-the-art compaction press kinematics, and continuous mesh-belt sintering furnaces under controlled endothermic atmospheres to deliver zero-defect FC-0208 parts.
Computerized dosing of high-compressibility water-atomized iron powder, elemental copper powder (<45 µm), and synthetic graphite. Lubricants (zinc stearate or ethylene bis-stearamide) are added to maximize green compact density stability.
Utilizing 100-ton to 1000-ton CNC multi-level presses to ensure uniform density distribution across multi-tiered stepped profiles, minimizing density gradients and suppressing sintering deformation.
Components travel through a multi-zone continuous sintering furnace at 1130°C under N2-H2 synthetic atmosphere. Copper melts, wetting iron grains and diffusing into the iron lattice, followed by controlled fast-cooling (sinter-hardening) to form fine pearlite and martensite.
Includes carbonitriding, induction hardening (reaching surface hardness > 55 HRC), resin sealing for gas-tight hydraulic applications, tumbling, vibratory polishing, and black oxide or zinc-nickel plating.
Evaluating total manufacturing efficiency and design freedom for medium-to-high volume industrial production.
| Evaluation Parameter | FC-0208 Powder Metallurgy | Full CNC Machining (1045 Steel) | Investment Casting (Carbon Steel) |
|---|---|---|---|
| Material Utilization | 95% – 98% (Near-Zero Scrap) | 40% – 60% (High Chip Waste) | 70% – 85% (Sprue & Riser Waste) |
| Unit Cost (Volume > 10k) | Lowest (Automated Pressing) | High (Prohibitive Machine Time) | Moderate to High (Labor Intensive) |
| Geometric Complexity | High (Internal Gears, Keyways) | Moderate (Limited by Tool Access) | Very High |
| Surface Finish (As-Sintered) | Ra 1.6 – 3.2 µm | Ra 0.8 – 3.2 µm | Ra 3.2 – 6.3 µm |
| Self-Lubrication Option | Yes (Oil Impregnated) | No (Solid Dense Metal Only) | No |
JHMIM (Ningbo Jiehuang Chiyang Electronic Tech Co., Ltd.) operates under strict international quality controls to protect global buyer supply chains.
Our Quality Management System governs every step, from raw powder lot incoming inspection (spectrometry chemical validation) to green compact density verification, CMM 3D dimension scanning, microstructural metallography checks, and 100% optical sorting.
All FC-0208 sintered components comply fully with EU RoHS 3 Directive (2015/863/EU), REACH regulations (SVHC Candidate list), and Conflict Minerals sourcing guidelines, accompanied by complete IMDS documentation for automotive OEMs.
We provide comprehensive engineering DFM (Design for Manufacturability) analysis within 48 hours. Flexible shipping arrangements include DDP, CIF, and FOB, supported by inventory buffering and vendor-managed inventory (VMI) hubs for North American and European clients.
Expert insights from our senior metallurgical team regarding FC-0208 processing, tooling, and design parameters.
The main distinction lies in the combined carbon content. FC-0208 contains 0.6% to 0.9% combined carbon, whereas FC-0205 contains 0.3% to 0.6%. Consequently, FC-0208 exhibits higher yield strength, greater surface hardness, and superior wear resistance, making it ideal for high-torque gears, structural levers, and wear plates.
Yes. FC-0208 responds exceptionally well to heat treatment processes, such as carbonitriding and quench-and-temper cycles. Heat treatment transforms the matrix micro-structure into tempered martensite, elevating surface hardness up to 30–45 HRC for demanding wear applications.
Standard as-sintered tolerances for radial dimensions range from ±0.03 mm to ±0.08 mm depending on part geometry and press tonnage. By implementing secondary sizing (coining or repressing), radial tolerances can be held to tight limits of ±0.015 mm.
During sintering at temperatures above 1083°C, copper melts into a liquid phase. The liquid copper coats the iron particles and diffuses into the iron crystal lattice, causing controlled volumetric growth. Precise chemical control of the copper content (within ±0.15%) guarantees predictable tool die expansion modeling.
Standard tooling development and prototype sample delivery take approximately 30 days. Our standard Minimum Order Quantity (MOQ) for custom FC-0208 powder metallurgy components starts at 5,000 pieces per production run, with lower pilot quantities available for initial qualification testing.
Send your 2D (PDF) and 3D (STEP) drawings today. Receive an engineer-reviewed DFM assessment and transparent wholesale quotation within 48 hours.