As Central Asia's primary industrial and manufacturing engine, Kazakhstan is rapidly upgrading its equipment manufacturing, mineral extraction tools, agricultural machinery, and power tool assembly infrastructure.
Historically, industrial plant managers and tool manufacturers across key industrial hubs like Almaty, Karaganda, Shymkent, Astana, and Atyrau relied heavily on subtractive 5-axis CNC machining or traditional investment casting. However, complex internal geometries, high metal scrap rates (often exceeding 60%), and long cycle times created significant operational friction.
Metal Injection Molding (MIM) bridges the gap between plastic injection molding versatility and the mechanical integrity of wrought metals. By fusing ultrafine metal powders with polymer binders, MIM produces near-net-shape components with complex 3D contours, internal channels, and strict dimensional tolerances (±0.3% to ±0.5%), eliminating expensive secondary machining.
Switching from CNC machining to JHMIM metal injection molding delivers a 30% to 50% unit cost reduction for batch volumes exceeding 2,000 pieces per annum. Furthermore, it achieves 95% to 98% material utilization, vital for high-cost alloy grades such as 17-4PH, 316L, and 42CrMo4 alloy steels.
Tailored engineering formulations designed to withstand severe continental climatic extremes (-40°C winter to +40°C summer) and abrasive operational environments.
Extremely tough tungsten-carbide infused MIM wear blocks, hydraulic valve spools, and mechanical coupling pawls engineered for heavy underground mining equipment, coal excavators, and mineral processing units in Karaganda and Pavlodar.
High-density 316L stainless steel mini ball valve bodies, metering orifice plates, and downhole sensor housings engineered to resist high H₂S and saline corrosion environments typical of the Caspian basin oil fields and refinery installations.
Precision micro planetary gears, clutch ratchets, impact wrench anvils, and ergonomic trigger assemblies produced in 17-4PH and 8620 alloy steel for electric power tool factories and assembly plants in Almaty and Shymkent.
High-security lock cylinders, deadbolt cams, anti-pick tumbler pins, and electronic door lock solenoids manufactured for high-end construction hardware suppliers and vault manufacturers serving Astana’s commercial expansion.
Heavy-duty seed metering gears, fertilizer spray nozzle cores, and tractor hydraulic linkage brackets built to survive harsh dust, impact loads, and exposure to agrochemicals across Kostanay and Petropavl farming machinery hubs.
Specially heat-treated Fe-Ni-Mo micro-alloyed MIM components designed to retain high Charpy impact energy levels and fracture toughness under severe -40°C Siberian blast conditions in Northern Kazakhstan.
JHMIM utilizes advanced vacuum sintering furnaces and catalytic debinding systems to deliver physical properties comparable to forged metals.
| Material Grade | MIM Designation | Sintered Density (g/cm³) | Tensile Strength (MPa) | Yield Strength (MPa) | Hardness | Primary Industrial Application |
|---|---|---|---|---|---|---|
| 17-4PH Stainless Steel | MIM-17-4PH | ≥ 7.60 g/cm³ | 1,150 MPa | 1,000 MPa | 38 - 44 HRC | High-strength structural latches, industrial tool levers |
| 316L Stainless Steel | MIM-316L | ≥ 7.80 g/cm³ | 520 MPa | 220 MPa | 75 - 85 HRB | Petroleum fluid valves, chemical meters, food processing tools |
| 42CrMo4 / 4140 Steel | MIM-4140 | ≥ 7.55 g/cm³ | 1,480 MPa | 1,320 MPa | 48 - 54 HRC | High-torque gears, power tool impact anvils, mining pins |
| Fe-8Ni Low Alloy Steel | MIM-Fe8Ni | ≥ 7.60 g/cm³ | 980 MPa | 750 MPa | 30 - 36 HRC | Heavy machinery cams, ratchet mechanisms, lock components |
| Titanium Ti-6Al-4V | TiMIM Grade 5 | ≥ 4.42 g/cm³ | 930 MPa | 860 MPa | 32 - 36 HRC | Lightweight aerospace tools, non-magnetic specialty instruments |
Ultrafine spherical metal powder (3–20 µm) is blended with polymer binders to create uniform feed pellets.
Injected on high-speed CNC injection units to form oversized "green" components with 20% volumetric shrinkage allowance.
Nitric acid vapour atmosphere removes the primary binder system, leaving a porous "brown" metal structure.
Sintered at 1,350°C in high-vacuum or hydrogen atmosphere to densify parts to up to 99% theoretical density.
Direct overland logistical corridors connect JHMIM’s Ningbo manufacturing complex to major Kazakhstani industrial centers rapidly and economically.
Real-world performance improvements achieved by switching to JHMIM metal injection molded components.
Challenge: A mining machinery OEM in Karaganda was experiencing high wear and 42% scrap rates when CNC machining 4140 steel hydraulic locking pawls for drill rigs.
MIM Solution: JHMIM converted the part to a net-shape MIM-4140 alloy with localized induction hardening to 52 HRC.
Result: Unit component cost dropped by 44%, fatigue life increased by 35%, and machining scrap was reduced to zero.
Challenge: A valve plant supplying oilfield pipelines in Atyrau required complex internal fluid channels resistant to sour gas (H₂S) corrosion, impossible to produce in one piece via standard turning.
MIM Solution: Single-piece MIM-316L molding with integrated valve stems and micro-orifices.
Result: Eliminated multi-component welding, eliminated leak points, and passed 100-bar hydrostatic pressure testing cleanly.
Challenge: An electric tool factory in Almaty needed high-volume, lightweight helical gear sets capable of transferring 120 Nm torque without tooth shearing.
MIM Solution: Engineered 17-4PH stainless steel gear sets with H9 tooth profile accuracy directly out of the sintering furnace.
Result: Reduced assembly space by 20% and reduced production costs by 38% compared to hobbed gear sets.
Everything you need to know about tooling, tolerances, logistics, and localized Kazakstan support.
Our standard production MOQ for custom metal injection molding parts is 2,000 pieces per run. However, for initial engineering trials, pilot production, or high-value titanium/tool steel parts, lower volume pilot lots can be arranged following DFM approval.
Yes, absolutely. We routinely sign strict bilateral NDAs with industrial buyers in Kazakhstan prior to receiving STEP or PDF engineering drawings. All tooling remains your exclusive property and is strictly maintained for your orders only.
MIM tooling manufacture and initial sample production takes approximately 25 to 35 calendar days. First Article Inspection (FAI) reports, including full CMM dimension data and raw material composition certificates, are delivered alongside samples.
We perform tailored thermal cycles, tempering, and cryogenic treatments for low-alloy steels (such as MIM-4140 and MIM-Fe8Ni) to elevate Charpy impact resistance at sub-zero temperatures, ensuring parts do not experience brittle failure under heavy loads.
MIM is most cost-effective for parts weighing between 0.2 grams and 150 grams, with maximum dimensions usually under 100 mm. For larger components, JHMIM provides complementary Powder Metallurgy (PM) or Aluminum/Zinc Die Casting options.
Every shipment comes standard with a Certificate of Analysis (COA), Material Test Report (MTR), CMM Inspection Report, Certificate of Origin (Form A / Form E), Commercial Invoice, and Packing List formatted for rapid EAC customs clearance.
High-volume sintered metal, MIM hardware, and custom die castings for equipment manufacturers.
Upload your 2D (PDF) and 3D (STEP/IGES) CAD models today. Our senior metallurgy engineers will return a complete Design for Manufacturability (DFM) review and transparent tooling/part price quote within 48 hours.
Direct Email: [email protected] | Phone / WhatsApp: +86-13605745108